產品參數/ Product parameter
即使是手排跑車，一樣需要有優異馬力的操作敏捷
TOROK手動夾具王是迎合非動力夾持需求而設計，有很多機械需要精密夾持但沒有空壓或油壓單元可作驅動，因此手動夾頭極為適合類似的夾持需求，無論磨床、半自動機械，手動夾頭提供方便快速與重力夾持解決車切削需求，輕夾持可以達到的高同心度與重覆精度要求，提升機械的生產效率。
標準規格：65型、100型(其它規格另詢)
適用于：圓筒、內孔磨床，車床，專用機，滾齒機、插齒機、教學使用車床。
優勢：
●全包式夾持，使用標準夾固頭。
●高剛性。
●同心度與重復夾持精度高。
●快速換模。
●夾持力量高而且可以調整。
●具備相同夾具王系統的優點。
●后拉式夾持，承靠止動器。
●*夾持再加上額外的續夾能力。
●更換不同夾固頭，同心度依然保持。
●可高速運轉(有止動器時)且刀具壽命延長。
●無須油壓缸或其它動力。
CLAMPS GENTLY OR FORCEFULLY
The TOROK manual actuated chuck is primarily used in prototyping on machines without a clamping cylinder. Basically, it is implemented wherever users are reluctant to sacrifice the accustomed HAINBUCH quality when a clamping cylinder is not available.
Best of all:
Thanks to its easy manual actuation you can safely and delicately clamp in the customary manner when used on grinding machines. For example: With an optional base plate the TOROK can also quickly be converted for stationary use.
More clamping options in combination with clamping devices-adaptations
And in combination with our clamping device adaptation, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping possibilities are available to you. In the future you can also rely completely on the HAINBUCH modular system, even for your manual chuck.
Key advantages
●Sensitive manual clamping is possible
●Manual actuation – a clamping cylinder is not required
●Concentric precision < 0.01 mm possible
●Minimal inertia loss
●Standard flanges available with adjustable bolt, Camlock upon request
TOROK手動夾具王是迎合非動力夾持需求而設計，有很多機械需要精密夾持但沒有空壓或油壓單元可作驅動，因此手動夾頭極為適合類似的夾持需求，無論磨床、半自動機械，手動夾頭提供方便快速與重力夾持解決車切削需求，輕夾持可以達到的高同心度與重覆精度要求，提升機械的生產效率。
標準規格：65型、100型(其它規格另詢)
適用于：圓筒、內孔磨床，車床，專用機，滾齒機、插齒機、教學使用車床。
優勢：
●全包式夾持，使用標準夾固頭。
●高剛性。
●同心度與重復夾持精度高。
●快速換模。
●夾持力量高而且可以調整。
●具備相同夾具王系統的優點。
●后拉式夾持，承靠止動器。
●*夾持再加上額外的續夾能力。
●更換不同夾固頭，同心度依然保持。
●可高速運轉(有止動器時)且刀具壽命延長。
●無須油壓缸或其它動力。
CLAMPS GENTLY OR FORCEFULLY
The TOROK manual actuated chuck is primarily used in prototyping on machines without a clamping cylinder. Basically, it is implemented wherever users are reluctant to sacrifice the accustomed HAINBUCH quality when a clamping cylinder is not available.
Best of all:
Thanks to its easy manual actuation you can safely and delicately clamp in the customary manner when used on grinding machines. For example: With an optional base plate the TOROK can also quickly be converted for stationary use.
More clamping options in combination with clamping devices-adaptations
And in combination with our clamping device adaptation, such as the MANDO Adapt mandrel-in-chuck or the jaw module, many more clamping possibilities are available to you. In the future you can also rely completely on the HAINBUCH modular system, even for your manual chuck.
Key advantages
●Sensitive manual clamping is possible
●Manual actuation – a clamping cylinder is not required
●Concentric precision < 0.01 mm possible
●Minimal inertia loss
●Standard flanges available with adjustable bolt, Camlock upon request
